Advanced Distributors

25D Points distributor package

Fri, 24 May 2013 01:24:06 GMT

$269.00
Our 25D Points Ignition Package includes everything you need to install a great performing points ignition system in your 4 cylinder British car! It includes a completely rebuilt and performance modified GENUINE Lucas distributor, a newbreaker plate assembly installed and tested, the best cap and rotor set on the market, a pre-installed lifetime warranty spark plug wire set numbered for cylinders 1 through 4, and its ready to drop in place. Also included is a matching high performanceBosch ep....

45D Breaker Plate Assembly!

Fri, 24 May 2013 01:24:06 GMT

$25.00
This is a new breaker plate assembly to fit 45D Lucas and aftermarket replacement distributors. This breaker plate is a complete new assembly with points, condenser, ground wire, and terminal block already installed. It solves many problems caused by worn breaker plates, which are VERY common. It will NOT fit other type Lucas distributors, so if yours is not listed, please inquire before ordering!!! ....

Electronic Ignition for 25D distributors

Fri, 24 May 2013 01:24:06 GMT

$19.00
This is a very inexpensive (made in China) electronic ignition for 4 cylinder 25D distributors, as used from '62-'74. It is for negative earth applications only. They fit, they work, instructions are on the packaging. Sold by others on Ebay as Accuspark or Stealth brand.The photo depicts it installed in a distributor - distributor/breaker plate not included.No implied or expressed warranty. ....

Points assembly for 22D, 23D, 25D, and late DM2 lucas

Fri, 24 May 2013 01:24:06 GMT

$12.00
This is an extremely well made set of points, condenser, and terminal block. They are preassembled for ease of installation, so you don't need to know how the insulators, wires, and spring need to be assembled to prevent failure/shorting. This is the same assembly available as a full breaker plate package. They fit all 22D (TR6 and Jaguar), 23D (Mini Cooper S), and 25D distributors (British 4, 6 cylinder cars from '62-74.) They also fit in the DM2 distributors, but the terminal block will no....

45D distributor cap

Fri, 10 Aug 2012 14:55:00 GMT

$20.00
This is a brass terminal 45D distributor cap to fit all 43D, 45D, 45DE4, and 45DM4 distributors, as well as all aftermarket 45D "Lucas" type distributors. The fit of this cap is perfect, as its a redesign of the Lotus high performance cap with excellent internal bracing, and all 5 terminals in brass for durability.....

1275 Timing Tape Only

Fri, 29 Jun 2012 12:22:07 GMT

$7.00
This is the vinyl tape from the 1275 timing tape kit, with instructions. It is the tape ONLY, NO POINTER. This works great forall 1275 engines that already have a top-side pointer. This ONLY fits 1275s, no other A-series engines unless you have installed the 1275 balancer and timng cover.....

1962-74 MGB Timing Tape ONLY

Fri, 09 Mar 2012 09:37:16 GMT

$7.00
This is the vinyl tape from the MGB timing tape kit, with instructions. It is the tape ONLY, NO POINTER. This works great for mid-'71 through '74 MGBS that already have a top-side pointer. It ONLY fits 1962-1974 MGB 1800 harmonic balancers and timing covers. No other applications unless you have fitted these parts. ....

MGB Shortened Shifter - 4 synchro only

Thu, 10 Mar 2011 10:07:19 GMT

$40.00
This is a shortened MGB shift lever to fit all 4-synchro MGB gear boxes. It is 1 1/2" shorter than original for a better feeling shift. There is no core charge, the shifter is sold outright - fully threaded as pictured and ready to install. Bead blasted and painted with high temp black for durability. It does not have a groove for Overdrive wires as used in 1980. ....

25D Breaker Plate Assembly!

Tue, 11 Jan 2011 14:52:28 GMT

$25.00
This is a new breaker plate assembly to fit Most DM2 distributors, all 25D distributors, and all 22D distributors. Applications include but are not limited to: MGA, MGB through '74, TR3-4-5-6, 4&6 cyl Jaguar through '74, Midget, Most Sunbeams, Mini through '74, etc... This breaker plate is a complete new assembly with points, condenser, ground wire, and terminal block already installed. I've tested them through 8,000 rpms and installed 100's of them with no issues. It solves many problems c....

Terminal Block

Sat, 28 Nov 2009 12:42:18 GMT

$8.00
Finally! After years of suffering with ill-fitting replacement parts, I have a Terminal Block that fits! It presses firmly onto the distirbutor body, has an ultra-flexible wire with 350 strands of supple copper wire, a silicon jacket (think premium spark plug wire jackets), and brass/steel terminals for great conductivity and durability. . Replace that shabby old questionable terminal block now! This fits all 22D, 23D, and 25D distirbutors. Older DM2 distributor with a "fork" on the ....

Premium Austin Healey and Jaguar 6 cyl Breaker Points!

Sat, 28 Nov 2009 12:33:45 GMT

$16.50
These are Standard Ignition maed in the USA ignition points! These are the finest points available for the DM6 series AH 3000 and Jaguar distributors - hands down!!! They have huge tungsten contacts for severe duty, so the gap doesn't change as much as they wear.) The spring rate is higher than any other contact set, so they run great up through 7,000 rpms without a glitch. They fit the breaker plate with a TON of room for adjustment, and the plastic heel that rides ....

Bosch Lifetime 6 cylinder plug wires

Sat, 28 Nov 2009 12:12:14 GMT

$20.00
These are some nice, lifetime guaranteed plug wires for most '63 and newer 6 cylinder British cars. They fit top-entry distributor caps and have straight ends at the distributor and at the spark plug. They are grey with black boots. This is a carbon core resistor plug wire. Designed for use with a push-in coil wire, not threaded. Fits cars such as the MGC, TR6, and others, (not Jaguar.) Sometimes the warranty says it all, and this is one of those cases. ....

Bosch Lifetime 4 cylinder plug wires

Sat, 28 Nov 2009 12:10:23 GMT

$19.00
These are some nice, lifetime guaranteed plug wires for most '68 and newer 4 cylinder British cars. They fit top-entry distributor caps and have 90 degree ends at the distributor and at the spark plug. They are grey with black boots. This is a carbon core resistor plug wire. Designed for use with a push-in coil wire, not threaded. Sometimes the warranty says it all, and this is one of those cases. ....

MGB or TR4 Rear Wheel Spacers

Sat, 28 Nov 2009 12:02:11 GMT

$35.00
These are quality made, perfect fitting 1/4" thick wheel spacers for the MGB of TR4, and others with the 4 x 4 1/2" bolt spacing. They also fit the modified wire wheel axles on the MGB, to fit bolt-on wheels using 12mm replacement studs. I use them on my own car, hence the reason why a distributor guy would stock wheel spacers. They come in PAIRS, for proper spacing on the MGB when using ARP wheel studs with a solid-wheel conversion. 2 pairs are required for the ....

MGB Brake adjust and valve adjust wrench

Sat, 28 Nov 2009 11:55:17 GMT

$15.00
This is a very handy wrench for your tool roll! This wrench fits the MGB (and others) for both adjusting the valves and adjusting the rear brakes! Its a perfect fit, made of heavy-duty stainless steel. Its a no-brainer to add to your tool box or tool roll, and its made right here in Iowa. It has a well designed offset on each end and allows you to make adjustments without banging your knuckles like you'd do with a standard wrench. Great stuff!!!....

Top Dead Center tool

Sat, 28 Nov 2009 11:44:39 GMT

$11.00
This tool will help you find the REAL Top Dead Center mark for your engine, so you can accurately set the timing on your car! Th eouter ring can shift, or just be plain wrong from the factory. This tool helps you make a new, accurate mark in just minutes. Here's how it works. Screw it into the #1 spark plug hole. Turn the engine by hand until the piston touches the tool. make a mark on your crank pulley. Turn theengien by hand in the opposite direction until the pistonhits the tool.....

Side entry MGA Distributor cap w/ brass contacts!

Sat, 28 Nov 2009 11:38:48 GMT

$20.00
I now have a good inventory of hard-to-find "side entry" distributor caps with solid brass contacts! They're a well made, tight fitting cap that won't let you down! The brass terminals will last for years compared to the aluminum terminal caps. These fit any DM2, 23D, or 25D 4 cylinder distributor, but are designed for an MGA, early MGB, Rover, magnette, and others with the electrical terminal at a 90 degree opposed position to the plug wires. *** This is NO....

45D 4 & 6 Cylinder ignition rotor

Sat, 28 Nov 2009 11:29:55 GMT

$15.00
This is a brand new product!!! This red ignition rotor was designed to solve all the issues common with with Lucas brand rotors! The solid brass terminal is thermally bonded to ensure it will never come loose and thicker than any other manufacturer. There is NO RIVET to loosen up or create a short to the distributor shaft, which would leave you stranded. There is also ZERO black carbon in the plastic material to help aid in an ignition short to the shaft, or anywhere else that power is not....

Universal Distributor Ground/Earth Wire

Sun, 17 May 2009 14:34:17 GMT

$4.00
This is a universal replacement ground wire for your distributor. It will fit all 45D distributors as-is, or it can be cut and soldered into place to replace a tattered 22D, 25D or DM2 ground wire found in almost every British car made from 1950-1974. The construction is a fine grade 350 strand (yes 350 strands!!!) copper wire with solid brass crimped end terminals, designed as original. It is insulated with a soft, ultra-flexible silicon jacket, very similar to spark plug wires. This is....

6 Cylinder Jag top entry Distributor cap with brass contacts

Thu, 12 Mar 2009 16:59:31 GMT

$24.00
I now have a good inventory of hard-to-find "top entry" distributor caps with solid brass contacts! They're a well made, tight fitting cap that won't let you down! The copper terminals will last for years compared to the aluminum terminal caps, and they conduct electricity faster!. These are a heavy duty cap! These fit any 25D6 6 cylinder distributor with screw-in plug wires as used on many Jaguar models. Plug wire fittings not included.....

6 Cylinder top entry Distributor cap with brass contacts!

Wed, 04 Mar 2009 11:55:19 GMT

$20.00
I now have a good inventory of hard-to-find "top entry" distributor caps with solid brass contacts! They're a well made, tight fitting cap that won't let you down! The copper terminals will last for years compared to the aluminum terminal caps, and they conduct electricity faster!. These are a heavy duty cap! These fit any 25D6 6 cylinder distributor (such as the MGC or TR6). ***While they last*** When these caps are gone, they'll likely be backordered for months, possibly the entire sum....

Side entry AH 3000 distributor cap!

Wed, 04 Mar 2009 11:53:06 GMT

$45.00
I now have a good inventory of hard-to-find "side entry" distributor caps for the AH 3000 (not BJ8). They're a well made, tight fitting cap that won't let you down! These are actually NOS aftermarket caps made in the UK. The terminals are white metal rather than brass, but fit perfectly unlike most new aftermarket caps. Its a great, heavy cap that will last you years of reliable service. This cap ONLY fits the DM6A distributor, not the 25D series. That means it fits the pre-BJ8 cars.....

Side entry TR3/4 Distributor cap w/ brass contacts!

Wed, 04 Mar 2009 11:51:10 GMT

$20.00
I now have a good inventory of hard-to-find "side entry" distributor caps with solid brass contacts! They're a well made, tight fitting cap that won't let you down! The brass terminals will last for years compared to the aluminum terminal caps. These fit any DM2, 23D, or 25D 4 cylinder distributor, but are designed for a TR3 or TR4 (as examples) with the electrical terminal at a 180 degree opposed position to the plug wires. *** This is NOT the correct cap for MGs....

MGB Flyoff Handbrake Pawl

Mon, 16 Feb 2009 12:18:49 GMT

$10.00
This is a newly developed part to convert your MGB handbrake into a flyoff handbrake. Essentially, this means you can use your handbrake lever to apply the brakes anytime you want, without it locking in place. If you want to lock it, simply push the button in, then lift the lever to release. If you push the button while you try to release it, it acts like a theft deterrent system, relocking the brake. This is one of those cool gimmick parts that's so inexpensive and unique that you just ca....

4 Cylinder top entry Distributor cap with brass contacts!

Sun, 25 Jan 2009 18:50:57 GMT

$20.00
We now have a good inventory of hard-to-find "top entry" distirbutor caps with solid brass contacts! They're a well made, tight fitting cap that won't let you down! The brass terminals will last for years compared to the aluminum terminal caps. These are a heavy duty cap! These fit any DM2, 23D, or 25D 4 cylinder distributor (such as the MGB, MGA, TR3 or 4, Morgans, Sprites, Midgets, etc...) ....